Archive trainings

  • Course: Instructions for use and maintenance of the machines - Form and content in accordance with the Machinery Directive 2006 / 42 / CE

    Thursday 11 April 2019 - 10:00 - 17:30 headquarters SOUL

    What to write in the instruction manual and how to write it. Deepening on the instructions for use and maintenance of the machines in compliance with the 1.7.4 requirement. of Annex I of the 2006 / 42 / CE Machinery Directive.

  • Machinery Directive 2006 / 42 / CE - Risk Analysis and Preparation of Technical File - Basic Course

    Wednesday 10 April 2019 - 10:00 - 17:30 headquarters SOUL

    The course enables you to acquire risk assessment techniques, based on the requirements of the 2006 / 42 / CE Directive and harmonized standards prepared by CEN under the mandate of the European Commission.

  • Design of pressure vessels using the finite element method (Design by Analysis)

    Wednesday, March 13, 2019 - 09: 00 - Friday 15 March 2019 - 18: 00 headquarters SOUL

    The course, conducted in collaboration with EnginSoft, will be directed specifically to the description and presentation of procedures and modeling and analysis solutions for typical problems associated with the design of pressure vessels. Through practical and theoretical basis to run the Design by Analysis, the course will develop along the logical scheme proposed by the technical regulations ASME VIII Div.2 part 5 with references and comparisons with the European standard EN 13445 In this sense it will be encouraged the use of practical case studies proposed to the participants interactively.

  • Materials and objects in contact with food (MOCA) - interpretation and application of regulations and good manufacturing practices

    Tuesday 26 February 2019 - 10:00 - 17:30 ANIMA Federation (Milan)

    Objectives of the course:
    The course allows to acquire the basic knowledge on the legislative provisions related to MOCA, a fundamental prerequisite to clarify the mandatory obligations, in an area where laws and regulations are constantly evolving.
    The course, in addition to providing insights on the technical and operational tools aimed at ensuring the conformity of products and processes, deals with the best practices indicated by the current legislation with a declination in specific production situations.

  • Materials and objects in contact with food (MOCA) - interpretation and application of regulations and good manufacturing practices

    Tuesday 11 December 2018 - 10:00 - 17:30 headquarters SOUL

    The course allows to acquire the basic knowledge on the legislative provisions related to MOCA, a fundamental prerequisite to clarify the mandatory obligations, in an area where laws and regulations are constantly evolving. In addition to offering insights on the technical and operational tools aimed at guaranteeing the conformity of products and processes, it deals with the best practices indicated by current legislation with a declination in specific production realities.
    All in compliance with food safety and consumer health protection.

  • Course - Advanced training CQ-15635 Consultants for the correct maintenance of industrial shelving

    Thursday 6 December 2018 - 08:45 - 18:00 ANIMA Headquarters, Milan

    The associated companies AISEM / Shelving CISI propose an advanced training course on the maintenance of shelving according to the principles

  • SEMINAR Rohs Directive - Towards the 2019 Open Scope

    Friday 30 November 2018 - 10:30 - 13:30 Milan, ANIMA headquarters

    ANIMA Confindustria Meccanica Varia, in collaboration with ICIM, promotes, as a first in-depth study, an information seminar on the 2011 / 65 / EU 'RoHS' Directive which represents the legislative reference for the limitation of the use of certain hazardous substances in the equipment electrical and electronic.

    As a novelty, the 2011 / 65 / EU Directive introduces, starting from July of 2019, an "open-scope" that will ensure that part of the mechanical industry products will have to comply with the requirements of the Directive.

  • Instructions for use and maintenance of the machines - Form and content in accordance with the Machinery Directive 2006 / 42 / CE

    Wednesday, November 28, 2018 - 10:00 - 17:30 headquarters SOUL

    What to write in the instruction manual and how to write it. Deepening on the instructions for use and maintenance of the machines in compliance with the 1.7.4 requirement. of Annex I of the 2006 / 42 / CE Machinery Directive.


  • Materials and objects in contact with food (MOCA) - interpretation and application of regulations and good manufacturing practices

    Tuesday 27 November 2018 - 10:00 - 17:30 San Martino Buon Albergo (Verona)

    The course allows to acquire the basic knowledge on the legislative provisions related to MOCA, a fundamental prerequisite to clarify the mandatory obligations, in an area where laws and regulations are constantly evolving. In addition to offering insights on the technical and operational tools aimed at guaranteeing the conformity of products and processes, it deals with the best practices indicated by current legislation with a declination in specific production realities.
    All in compliance with food safety and consumer health protection.

  • Machinery Directive 2006 / 42 / CE - Risk Analysis and Preparation of Technical File - Basic Course

    Tuesday 27 November 2018 - 10:00 - 17:30 headquarters SOUL

    The course allows to acquire the techniques for risk assessment, based on the requirements introduced by the 2006 / 42 / CE Directive and the harmonized standards prepared by CEN on the mandate of the European Commission.

  • 1 from 8
  • >>

Companies and products

  • Members and product categories list

    In this section you will find the Repertoire of ANIMA member-companies , Complete and functional database of Italian companies in the mechanical sector.